CHICK REARING CAGES SYSTEM – qafas sanat azar

PRODUCTION EFFICIENCY and INNOVATION IN ONE …

Cage Legs:

are manufactured from galvanized sheet of 1.5 mm thickness. For maximum strength and size to provide a minimum number possible on the legs are sure boreholes. The system was placed in each eye one foot cage.
Eye Sizes:
Width: 1,200 mm
Depth: 625 mm
Height: 580 mm
Manure Band bearings:

It is manufactured from galvanized sheet metal thickness of 1 mm. to give direction to the movement of manure belts and feeders are designed to prevent manure spills.

Partition sheet metal cage:

It is manufactured from galvanized sheet metal thickness of 1 mm. Nipples located on each partition plate to pass through the pipes and of the age of the drinkers
to allow a height adjustment of sections being opened.

Old Wire Cage:

Ø ۲,۰ mm thick galvanized wire is woven from. The chicks entering the set to allow the construction of all floors distribution from the first day and the following days is designed to obviate the need to make the transfer to another department.

ALL COMPONENTS WIRE KNITTING OPERATIONS AFTER READING is galvanized.

FEEDING SYSTEM

Automatically running trolley feed is feed distribution system. feed is transmitted to the car via the feed screw in feed silos located outside the cluster. Bait cars are placed at the head of the queue is automatically moved by the cage and gearmotors. pouring mouth to the feed adjustment mechanism to facilitate the emptying of the feed lArA yem the feeder car at each floor is disposed. Bait cars are moved through the cage as the wheels on the rails are located on. The results provided fodder to take place in the cage compartment can access all the chicks from the first day of the oath, loss as a result of the disappearance of transporting feed into the cage farming has been reduced to levels close to zero.

Transport of Feed Screw:

The steel material is imported. Coils located in the front side set is moved through the motor capping group. Spirals, after having completed the filling of all the cars in the set are arranged sealing feed sensors for automatically stopping the feed shipment.

Feed Carts:

Galvanized sheet metal is produced. One slide was placed for each floor in order to control the amount of feed in the car. Feed of car wheels are made from Delrin material is formed on the channel in order to smoothly move on rails. Each bait car, each floor is equipped with a feed adjustment apparatus which prevents feed wastage. Feed operation of the car timers (timer) may be accomplished through the desired range.

Rails:

It may occur during the feed movement of the carriage and designed to prevent vibration and swing mounted. Rails 2.5 mm thick galvanized sheet is manufactured with a special design.

Feeders:

It is manufactured from galvanized sheet metal 0.7 mm thick. To take place in the cage feeders and special design is minimizing feed wastage. Feeders are supported with extra sheets as the front and rear portions of the cage. Feeding straps are made from galvanized steel sheet 2.5 mm thick. Thanks to The feeder wires are prevented chicks wander on oath.

DRINKING WATER SYSTEM

Quenching of the chick sequence and extending through the cage floor and on the nipple 3600 chicks with PVC water pipes (22 x 22 mm) is provided through. This supply of water passing through the tubes, at the beginning of each row and each floor is covered from a reservoir placed dual output units.
Two bowl system, two each eye so that the nipple is inserted 4 3600. The height of the nipple may be adjusted by means of a winder.

FERTILIZER ON DELIVERY SYSTEM

Fertilizer, manure falls onto the belt located below each layer. Regular intervals tapes are pulled through the engine and transferred to the discharge conveyor located at the end of a set of fertilizer in them. The set of spreading out through this set is transferred to a conveyor or carrier.

Fertilizer bands: 1180 mm width 1 mm thickness Polypropylene (PP) are the manure belts. causing the movement of the manure belts and situated at the back side of the cage as Ø ۵ “diameter rollers in the electro-static paint is painted. Fertilizer and manure conveyor channel standards set out conveyor is shipped with rubber, it has the construction of galvanized steel.